COMMENTS:
1. This EEPROM package is for AOC-STG-i2T Release 2 using Intel X540 no management.
2. Execute in UEFI shell.

EEPROM REVISION INFO:
12) STGI2T3B_UEFI (7/28/2017) - NUP
	1. STGI2T3B.bin - Based on Intel Supermicro_X540_MNG_NO_MNG_B0_4.50_FwWoL_80000628.bin from X540_NVMUpdatePackage_v4_50_EFI
		- SMC
			0x015 - 030Bh
			0x247 - 0734h
			0x248 - 15D9h
		- NIC
			0x010 - 0400h
		- Preboot 
			0x033 - 4033h
			0x030 - 0100h
			0x034 - 0100h 
		- Disable SW WOL support
			0x02C - FFFDh
		- LAN Function Select
			0x244 - 001Ch
		- LED
			0x265 - 0100h
			0x266 - 0504h
			0x26D - 0100h
			0x26E - 0504h
		- VPD pointer
			0x02F - 0700h

11) STGI2T3A_UEFI (6/27/2017)
	1. Made it for UEFI-Shell using NVMUpdate to flash firmware.

10) STGI2T3A (6/27/2017)
	1. STGI2T3A.bin - Based on Intel X540_MNG_NO_MNG_B0_4.50.bin
		- SMC
			0x015 - 030Ah
			0x247 - 0734h
			0x248 - 15D9h
		- NIC
			0x010 - 0400h
		- Preboot 
			0x033 - 4033h
		- Disable SW WOL support
			0x02C - FFFDh
		- LAN Function Select
			0x244 - 001Ch
		- LED
			0x265 - 0100h
			0x266 - 0504h
			0x26D - 0100h
			0x26E - 0504h
		- VPD pointer
			0x02F - 0700h
	2. Eeupdate 4/28/2017

9) STGI2T30 (12/10/2013)
	1. SMC revision:
		- Rev. 3.00 0x15 to 0300h
		- LINK Port1 LED color     0x265 to 0100h
                - LINK Port1 LED color     0x266 to 0504h
                - LINK Port2 LED color     0x26D to 0100h
                - LINK Port2 LED color     0x26E to 0504h
		- VPD structure template at 0x700

8) STGI2T2C (9/23/2013)
	1. SMC revision:
		- Rev. 2.0C 0x15 to 020Ch	
	2. Changed as requested from Jerry Ou:
		- LINK Port1 LED color 	0x266 to 4504h
		- LINK Port2 LED color 	0x26E to 4504h
		- LAN Function Select   0x244 to 001Ch from 0014h
		- Modification of batch file. 

7) STGI2T2B (9/17/2013)
	1. LAN EEPROM based on X540 MNG NO MNG B0 v4.4.
	2. Prepared for SMC:
		- Rev. 2.0B 0x15 020Bh
		- Vendor ID 0x248 15D9h
		- SubDevice ID 0x247 0734h 
	3. Changed: 
		- NIC mode 		0x10 to 0400h from 0C00h
		- LINK Port1 LED color 	0x266 to 4584h from 4504h
		- LINK Port2 LED color 	0x26E to 4584h from 4504h
		- IBA			0x33 to 4033h
		- Disable WOL support 	0x2C to FFDh


6) STGI2T2A (3/19/2012)
	1. SMC rev. 2.0A
	2. Disable WOL function on both ports

5) STGI2T20 (3/05/2012)
	1. Package rev. 2.0
	2. Update batch file
	3. Change word 0x2Ch to FFF5h to enable WOL on both ports
	4. Change word 0x38h to 014Fh to enable WOl on port 2

4) STGI2T1C (02/23/2012)
	1. Package rev. 1.0C
	2. Set iSCSI to enable as default setting
	3. Enable bit 5, offset 0x04h to support S1 WOL 

3) STGI2T1B (02/07/2012)
	1. Rev. 1B
	2. Set bit 11 of word 0x10 to disable (from 0C00h to 0400h) to support NIC mode

2) STGI2T1A (01/19/2012)
	1. New LAN EEPROM Based on X540 MNG NO MNG B0 v4.3.bin with changes from STGI2T1 image.
	2. Update batch file

1) STGI2T1: (01/05/2012)
	1. New LAN EEPROM Based on X540B01 EEPROM
        2. Following words to disable default PXE boot (NIC)
                Word 0x30 set to 0101h
		word 0x34 set to 0101h
        3. Following words to Enable iSCSI, PXE, and FCoE
                Word 0x33 set to 4033h
        4. Following words for SAN MAC Addresses Pointer (Rev. B0)
                Word 0x28 set to 059D
        5. Following words for The PCIe Expansion/Option ROM pointer of AOC-STG-i2T
                Word 0x05 changed from 8180 to 8060
        6. Following words for Port 1 Link LED color of AOC-STG-i2T
                Word 0x265 changed from 0500 to 4140
                Word 0x266 changed from 0104 to 4584
        7. Following words for Port 2 Link LED color of AOC-STG-i2T
                Word 0x26D changed from 0500 to 4140
                Word 0x26E changed from 0104 to 4584

 






